Presence Detector

Presence detector / Motion detector with constant light level control Passive infrared detector for ceiling mounting indoors
– Optional blinding of parts of the detection area
– Mixed light measurement
– Cyclical sending or sending on change of value of the measured brightness value (Lux) – Integrated two-position controller
– Constant light level control for a main group of luminaries and up to four additional groups of luminaries
– Lighting control confi gurable as fully automatic or semi-automatic
– Motion detection for three function blocks (presence detector, motion detector, and HVAC detector)
– 2 per function block selectable functions (A, B) on start of the presence detection and two per function block selectable functions (C, D) on expiration of the presence detection
– Confi gurable delay of 0…255 seconds between sending of function A and B respectively C and D
– Selection per function (A, B, C, D) switching On/Off, 8-bit value, selectable 8-bit value, 16-bit value, temperature value, brightness value, 8-bit scene control – Blocking object per function block
– Per function block confi gurable overshoot time, in each case confi gurable as a fi xed time, as switchable between two times via the bus, or settable to a value via the bus
– Parallel operation of several presence detectors (master-slave, master-master) without additional logic module
– Integrated IR receiver and IR decoder for IR remote controls with six pairs of pushbuttons
– Functions of the IR remote control selectable per pair of pushbuttons or per each single pushbutton of a button pair
– Per pushbutton selectable function toggle, switching on, switching off, 8-bit scene recall, 8-bit value, 16-bit value, temperature value, brightness value
– For each pair of pushbuttons selectable function switching On/Off, 2-button dimming with stop telegram, 2-button solar protection control, variable 8-bit value, 8-bit scene control
– Blocking object for IR decoder
– Test mode for easy start-up
– LED for display of detected movements in test mode, to be confi gured using ETS
– Integrated bus coupling unit, bus connection via bus terminal, Power supply over the bus line
– Ceiling mounting on a fl ush-mounting box with 60 mm diameter and min. 40 mm depth or in a housing for surface-mounting (to be ordered separately)
– Monitoring motion range horizontal 360°, vertical approx. 105°
– Monitoring motion of an area of diameter 8 m (depending on mounting/room height)
– Programming button reachable from front

5WG1258-2DB12 5WG1258-2DB12